Pyc is a specialized manufacturer of scissor jack,scissors jack,scissor jacks,electric scissor jack,scissor lift jack.
scissor jack parameter:
1) Loading capacity: 1T, 1.5T, 2T
2) DC voltage: 12V
3) Maximum current: 10A, 13A, 15A
4) Range of lift height: 11.5 - 34.5cm
5) Net weight: 4.3kg
6) Length of control wire: 4.5m
7) Auto overload protection
8) Engine with super long working time
9) Auto-limited of the lifting height
electric impact wrench Parameter:
1.engine:DC 12V
2.suitable sleeve:the metric system:17.19.21.23mm,
¡¡¡¡¡¡¡¡¡¡¡¡inch system£º11/16 3/4 7/8 15/16
3.moment of screwing dow:110-150N./m each time
scissor jack usage instruction:
1¡¢Put the jack near the tyre to be replaced
2¡¢Via the accessory,the power supply of cigarette ignitor or storage battery may be connected to
the jack.
3¡¢Take hold of the control handle and press the switch according to your require.("UP"means
rising,"DOWN"means falling.
4¡¢Make sure the jack should not be inclining when propping up.
5¡¢In case the engine becomes very hot after 3 minutes,it should be cooled for a while then it may work continually.
electric impact wrench usage instruction:
1¡¢Via the accessory,the power supply of cigarette ignitor or storage battery may be connected to the electric wrench.
2¡¢Put the quadrate hole onto the quadrate shaft of the electric wrench with suitable sleeve.
3¡¢According to the operation direction,press the back switch of handle.
4¡¢Press the front button of handle then it begins to work.By only once,it may be screw down;by twice,it may be loosen up.
related navigation:
Vibrating Plate Water Ball ball bearings miniature bearings micro bearings small bearings fishing bearings airsoft bearings yoyo bearings slot bearings ceramic bearing miniature thrust bearings stainless steel bearing skateboard bearings rc bearings Road marking machines instrument bearings precision bearings low friction bearings steel bearing high temperature bearing 6203 bearing bearing manufacturing motor bearing bicycle bearings thin bearings flanged ball bearings Deep Groove Ball Bearings wind turbines discount golf clubs
Products:
Contact Us:
PYC INTERNATIONAL CO.,LIMITED
Address :No.1065,2207 Room, Zhao Jia Bang Road, Shanghai,P.R.China
TEL : 0086-21-51695313
FAX : 0086-21-51062733
E-mail :sales@pycfitness.com
