electric screw jack
Pyc is a specialized manufacturer of electric screw jack,we manufacture and wholesale
of electric screw jack,screw jack, scissor jack,electric impact wrench in china.
electric screw jack parameter:
1.engine:DC 12V/18A
2.Minimum height:150mm
3.Height of propping up:140MM
4.Adjustable height:65mm
5.Loading Capacity ：2T, 1.5T
6.Unit weight: 5.8kgs
electric impact wrench Parameter:
1.engine:DC 12V
2.suitable sleeve:the metric system:17.19.21.23mm,
inch system：11/16 3/4 7/8 15/16
3.moment of screwing dow:110-150N./m each time
 |
 |
electric screw jack usage instruction:
1、Put the jack near the tyre to be replaced
2、Via the accessory,the power supply of cigarette ignitor or storage battery may be connected to
the jack.
3、Take hold of the control handle and press the switch according to your require.("UP"means
rising,"DOWN"means falling.
4、Make sure the jack should not be inclining when propping up.
5、In case the engine becomes very hot after 3 minutes,it should be cooled for a while then it may work continually.
electric impact wrench usage instruction:
1、Via the accessory,the power supply of cigarette ignitor or storage battery may be connected to the electric wrench.
2、Put the quadrate hole onto the quadrate shaft of the electric wrench with suitable sleeve.
3、According to the operation direction,press the back switch of handle.
4、Press the front button of handle then it begins to work.By only once,it may be screw down;by twice,it may be loosen up.
| Pyc's electric screw jack include: | related navigation: |
| screw jack electric impact wrench |
jack electric car jack scissor jack screw car jack auto jack car jack automobile jack scissor car jack electric wrench more electric screw jack |
